Our price - £2,190.00
See More Log Cabins
Note: The overall height of this cabin allows it to be constructed without planning permission as close as 500mm to your boundary. See our guide to planning permission here.
Note - This model comes complete with roofing felt and fixings kit as standard
All wooden components are untreated apart from the 50x50mm floor bearers that the cabin sits on. You will need to treat the external faces of the cabin with a suitable timber preserve as soon as possible after completing the build and certainly within 7 days. This will guard the timber against rot and insect attack.
This cabin comes complete with a fixing kit that includes all the screws, nails and hardware required to complete the build.
All our doors and windows are manufactured with georgian bars, not just stick on trims ! All windows are opening and come with a rubber seal. The door is supplied with a cylinder lock and three keys.
All our buildings are supplied with 4mm glass in the doors and windows. Should you require toughened safety glass, please call the office to confirm the cost of this upgrade
The cabin is supplied with out shed felt. We offer felt shingles as an option. These are superior in construction, longevity and looks compared to any shed felt and would recommend these were purchased. Please see further details on felt shingles here.
Cabins manufactured by Eurovudas are delivered ready for assembly. Our hauliers will call to arrange a convenient time for delivery. It is strongly advised to have two persons available to assist in off-loading the lorry. There are no mechanical means to assist !
Note : Our hauliers are contracted to kerbside only. Access must be available for a lorry, the size of a large dustcart, with a length of 11m and width of 3m. If in doubt, advise our hauliers of any potential hazards when they call to arrange delivery.
VAT is included in all prices on our website.
Other Sizes Available
5000 x 4000 Our Price - £2,733.00
Mr Stewart who purchased a Camborne 5x3 Log Cabin said "Delivery was fine, apart from the fact it was a day early. Product Quality - in general quality is good. Product is pretty much as described, with the exception of the flooring. Overall, I am satisfied, the general quality is good. I hope this is all taken as constructive feedback, because I have already recommended you to several people, and overall am happy with my purchase."
See all customer reviews here
Not what you were looking for ?
Try our easy to use
cabin search facility
Planning to install the cabin yourself ?
Take a look at our log cabin installation tips to make the build go well
Q : Can you please let me know if any of the windows open, or are they fixed. If fixed, is there an option for opening windows?Also, can the large 'end' window be positioned in the opposite end wall (LHS from front)?Thank you.
A : All the windows open. The window in the end wall can be positioned either in the left or right wall
Q : Hello,I have ordered this cabin (RC12373756) and would like to know the optimum base size required. I have had a look at the assembly instructions but would like clarification prior to the cabin arriving (in a few weeks?)Thank you in anticipation.
A : The absolute minimum base size is 4820x2820mm which must be square
Q : Can you get the Camborne or similar in 16ft x 10 ft ext 34 or 44 mm log
A : The standard size is 16' 5" x 9' 10" in either 44mm or 34mm logs. Will this size suit your requirements ?
Q : What is the delivery time on the 5 x 3 log cabin please
A : Current lead time is approx. 3 weeks
Q : Hello,Can you please tell me what to screw the 2 part fascia boards to. Mine have come in 2 parts with nothing in the centre to fit to. Does the rain wash over the top of it or should there be a gap between the felt & boards? Is it supposed to be flush with the felt?Thanks, Mick Marshall
A : The fascia board should be attached to the gable fascia and into the ends of the roof boards. There is a diamond shaped piece of wood that fits over the join. It is good practise to position the felt 5mm over the edge of the fascia board so that the waterfalls straight to the ground rather than run down the front of the fascia.
Q : Hi, is it possible to swap the end walls to put the window at the other end of the Camborne cabin?
A : Yes, this is not a problem.
Q : What is the roof made from please? 19mm T&G same as the floor?Mnay thanks
A : Yes, the roof is constructed from 19mm tongue and groove boards
Q : Hi 2 questions Camborne cabin1 does it com with a floor if so what2. Can the beading going across the windows be left of to give more light
A : Yes, the cabin comes complete with 19mm tongue and groove floor boards. The windows are constructed from separate panes for each quarter and therefore cannot be supplied as one large pane
Q : How high is the bottom edge of the window from the floor please?
A : Approximately 900mm
Q : what size concrete base is needed for the 5x3 Camborne log cabin please?
A : The minimum size required is 4820 x 2880mm
Q : I am interested in this cabin and would like to know the approximate time from placing an order to delivery.I would also like to know the rough cost from your sub-contractors to assemble it please.Thanks.
A : Current lead time is approx. 3 weeks. Depending on your location, installation is likely to be £480.00
Q : What is the delivery time on this product (Camborne log cabin 44mm) and can you give me the total price including roof shingle and delivery to a swansea address (sa43pz)
A : Current lead time on the Camborne is 3 weeks. Delivery to your postcode is £190.00
Q : I am interested in buying a Camborne 5x3. Can you tell me what the installation cost would be please?Thanks,Gerry
A : It will depend on your location, but likely to be £648.00
Guarantee / Timber Treatment
Please be aware, if moisture levels are allowed to build in excess of 40%, there is a risk of mould and fungus growth on the timber.
Moisture in the cabin will, in the first instance, condensate on the coldest surfaces (glass panes and wall corners). If the cabin is not ventilated properly and in extreme cases heated, wooden parts will show signs of mould growth and if not dealt with, rot will occur.
Should this occur, please note, it is not as a result of poor manufacture or materials and will not fall within our warranty policy.
In order to qualify for our guarantee, it is necessary to treat both external AND internal timber surfaces with an appropriate wood preservative / protector within 14 days of installing your cabin.